Docu for Gimbal24 board(s)

This page provides documentation for the STorM32-BGC board sold by Gimbal24.

Dos and Don'ts

Please read the tutorial's Dos and Don'ts.

Shop Link

http://www.gimbal24.de

Board Configuration

• board version: v1.3
• board color: black
• motor drivers in DFN packages: yes
• on-board MPU: yes
• on-board bluetooth module: yes
• I2C plug type: picoblade (1.25mm JST)
• I2C#2 plug type: picoblade (1.25mm JST)
• pin headers: no

comes flashed with latest firmware and with configured bluetooth module

in addition to the board one needs to get a IMU module plus cable for the camera

Specifications

• supply voltage: 6 - 18 V or 2 - 4S
• motor current: max. 1.5 A per motor
  Comment: This is not yet fully exploited, motors with resistances of 12 Ohm or larger have been tested to be well handled at 4S (see here, here), motors with 10 Ohm may be handled with care (see here and here).
• board dimensions: 50 mm x 50 mm, 45 mm bolt to bolt, holes Ø3 mm

Pins and Connectors

Flashing Firmware

Follow the instructions for v1.3 boards in the How to flash firmware manual.