Where to buy STorM32 boards

Sellers are listed in alphabetical order.

This is just a list of sellers and doesn't imply any recommendation by the firmware author or anyone else.

gimbal24

link: http://www.gimbal24.de

configuration:

• board version: v1.3
• board color: black
• motor drivers in DFN packages: yes
• on-board MPU: yes
• on-board bluetooth module: yes
• I2C plug type: picoblade (1.25mm JST)
• I2C#2 plug type: picoblade (1.25mm JST)
• pin headers: no

comes flashed with latest firmware and with configured bluetooth module

documentation: see Docu for Gimbal24 board

Multi Rotor Mania

link: http://multirotormania.com/controllers/42-stormbgc-32-bit-3-axis-controller-wimu.html

configuration:

• board version: v1.1
• board color: blue
• motor drivers in DFN packages: yes
• on-board MPU: yes
• on-board bluetooth module: no
• I2C plug type: picoblade (1.25mm JST)
• I2C#2 plug type: picoblade (1.25mm JST), pin assignment reversed
• pin headers: no

included accessories:

• MPU module
• cable with connectors for MPU module

documentation: see Docu for witespy board

points to note:

• the pins on connector I2C#2 are reversed as with respect to connector I2C
• on some boards the diode required for running a bluetooth module is not populated

Witespy - Ready To Fly Quads

link: http://witespyquad.gostorego.com/flight-controllers/storm32-bgc-3-axis-stm32-brushless-gimbal-controller.html

configuration:

• board version: v1.1
• board color: blue
• motor drivers in DFN packages: yes
• on-board MPU: yes
• on-board bluetooth module: no
• I2C plug type: picoblade (1.25mm JST)
• I2C#2 plug type: picoblade (1.25mm JST), pin assignment reversed
• pin headers: no

included accessories:

• MPU module
• cable with connectors for MPU module

documentation: see Docu for witespy board

points to note:

• the pins on connector I2C#2 are reversed as with respect to connector I2C
• on some boards the diode required for running a bluetooth module is not populated