Docu for witespy board(s): Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 23: | Line 23: | ||
* MPU module | * MPU module | ||
* cable with connectors for MPU module | * cable with connectors for MPU module | ||
== Specifications == | |||
* supply voltage: 6 - 18 V or 2 - 4S | |||
* motor current: max. 1.5 A per motor<br/>'''''Comment''': This is not yet fully exploited, motors with resistances of 12 Ohm or larger have been tested to be well handled at 4S (see [//www.rcgroups.com/forums/showthread.php?t=2055844&page=2&pp=50#post27515444 here], [//www.rcgroups.com/forums/showthread.php?t=2055844&page=15&pp=50#post28578479 here]), motors with 10 Ohm may be handled with care (see [http://www.rcgroups.com/forums/showpost.php?p=28825482&postcount=947 here] and [http://www.rcgroups.com/forums/showpost.php?p=28852888&postcount=953 here])''. | |||
* board dimensions: 50 mm x 50 mm, 45 mm bolt to bolt, holes Ø3 mm | |||
== Pins and Connections == | == Pins and Connections == | ||
Revision as of 11:24, 13 July 2014
This page provides documentation for the STorM32-BGC board sold by Witespy - Ready To Fly Quads.
Dos and Don'ts
Please read the tutorial's Dos and Don'ts.
Shop Link
Board Configuration
- board version: v1.1
- board color: blue
- motor drivers in DFN packages: yes
- on-board MPU: yes
- on-board bluetooth module: no
- I2C plug type: picoblade (1.25mm JST)
- I2C#2 plug type: picoblade (1.25mm JST)
- pin headers: no
- further: diode for bluetooth module not populated
included accessories:
- MPU module
- cable with connectors for MPU module
Specifications
- supply voltage: 6 - 18 V or 2 - 4S
- motor current: max. 1.5 A per motor
Comment: This is not yet fully exploited, motors with resistances of 12 Ohm or larger have been tested to be well handled at 4S (see here, here), motors with 10 Ohm may be handled with care (see here and here). - board dimensions: 50 mm x 50 mm, 45 mm bolt to bolt, holes Ø3 mm
Pins and Connections
Flashing Firmware
Follow the instructions for v1.1 boards in the How to flash firmware manual.
