Manuals and Tutorials

Tutorial Getting Started Tuning Guide Configure the RC Input Hold versus Pan Mode Manuals How to flash firmware GUI (o323BGCTool) FAQ How to install and use a joystick

Reference Manuals Leds Pins and Connectors Bluetooth Module HC06 Which MPU modules do work with the board Where to buy STorM32 boards Where to buy accessories and supplies How to order the electronic parts How to order print boards (PCBs)

FAQ

1. What connectors are used for connecting the MPU modules to the board?

The connectors for the MPU modules on the STorM32bgc board are Molex picoblade types with 1.25 mm pitch (for a comparison of various connectors see here). They are also known as micro JST 1.25 mm, and it is in fact best to search for this, e.g. on ebay: micro jst 1.25.

2. Storing the parameter values to the EEPROM doesn't seem to work

Please double-check that the correct firmware for your board has been flashed. The problem typically happens then e.g. the firmware for a F103RB is flashed onto a board with a F103RC.

3. Which drivers are needed for the USB?

On Win7 the driver is usually installed automatically (this may take few minutes, be patient). The driver, usable also for WinXP, can also be obtained from here.

4. Flashing with the usb-ttl adapter produces Windows error messages

If upon flashing you get Windows errors such as mfc110.dll is missing, msvcr110.dll is missing, or application was unable to start correctly (0xc000007b), then first check that you're not using an outdated GUI version. Otherwise, you need to install the VC++ runtime libraries. Download vcredist_x64.exe or vcredist_x86.exe depending on your Win system from here, and run the exe file.