CAN Bus Communication

From STorM32-BGC Wiki

Revision as of 02:28, 24 November 2017 by OlliW (talk | contribs) (Created page with "''The information on this page refers to firmware v2.33e and higher.'' The STorM32 gimbal controller supports DJI CAN bus and UAVCAN. This allows communicating with the STorM...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

The information on this page refers to firmware v2.33e and higher.

The STorM32 gimbal controller supports DJI CAN bus and UAVCAN. This allows communicating with the STorM32 board through a CAN bus, very similar to the communication through the serial interfaces or Wifi.

Retrieved from "http:///storm32bgc-wiki/index.php?title=CAN_Bus_Communication&oldid=6707"