Where to get NT Modules
Pre-assembled ready-to-use NT modules are currently - unfortunately - not available commercially.
However, the CC3D Atom can easily be used as a NT Imu module. The GLB mini CC3D atom provides the most compact solution but is more currently probably the best option, or when shipping time matters the BG CC3D atom (see post #2 for links).
[B]CC3D atom NT imu modules:[/B]
the [URL="https://wiki.openpilot.org/display/WIKI/CopterControl+-+CC3D+-+Atom+Hardware+Setup"]Open Pilot CC3D Atom[/URL] can be used as NT imu module, when flashed with the respective NT firmware when stripped off the pin headers it is smaller than the above "big" v1.0 NT imu modules, this is not necessary for the "mini CC3D atom" it is available cheaply from various Asian sources, and of course at somewhat higher prices in many "regular" shops, and can come in various different hardware flavors some links - [url]http://www.banggood.com/OpenPilot-CC3D-Atom-Mini-CC3D-FPV-Flight-Controller-CC3D-EVO-p-970762.html[/url] (ships straight from EU or USA warehouses!) - [url]http://www.goodluckbuy.com/openpilot-mini-cc3d-atom-nano-cc3d-side-pin-flight-controller-for-fpv-qav-250-400-quadcopter-.html[/url] - [url]http://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20150822235223&isPremium=y&SearchText=openpilot+cc3d+atom[/url] - [url]http://www.goodluckbuy.com/mini-cc3d-32-bit-openpilot-open-source-flight-controller-processor-with-case.html[/url] - [url]http://www.banggood.com/Openpilot-MINI-CC3D-NANO-Atom-Flight-Controller-for-QAV250-Multicopter-250-Frame-Kit-p-992324.html[/url]
the "mini CC3D atom" is currently probably the best and easiest and cheapest solution to get a NT imu module
[B]Sources for cables:[/B]
Unfortunately I don't know about a good, i.e reasonably priced and readily available, source of suitable pre-configured cables with plugs. The 1mm JST has however become kind of a standard and is used by many electronics, such as flight controllers, AM gimbal controllers, etc., which gives options. Some options I know a about are:
- ReadyToFlyQuads/witespy: [url]http://www.readytoflyquads.com/cables[/url]
explore the shop carefully and study the various options for configuration which are offered, with the right clicks it offers actually some good deals
- Viacopter: [url]https://www.viacopter.eu/multirotor-shop/accessories/connectors-and-wires[/url]
- Goodluckbuy: [url]http://www.goodluckbuy.com/bgc-2-0-brushless-gimbal-driver-sensor-connection-cable-for-gimbal-controller.html[/url]
The silicon wires are not as flexible as for other imu module wires, but in lack of better options OK. Quite expensive.
- Flyduino: [url]http://flyduino.net/Brushless-Gimbal-Kamerastabilisierung[/url]