STorM32 Boards: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 14: | Line 14: | ||
* MCU: STM32F103RC | * MCU: STM32F103RC | ||
Comment: The order of pins on the I2C#2 port is reversed to that on the I2C#1 port; please consider this then connecting an MPU module to this port. | '''Comment:''' The order of pins on the I2C#2 port is reversed to that on the I2C#1 port; please consider this then connecting an MPU module to this port. | ||
Line 22: | Line 22: | ||
* MCU: STM32F103RB | * MCU: STM32F103RB | ||
Comment: The location of the pins needed to flash the firmware via an USB-TTL adapter is different here. Namely: | '''Comment:''' The location of the pins needed to flash the firmware via an USB-TTL adapter is different here. Namely: |
Revision as of 15:51, 20 February 2014
Currently, three different versions of STorM32-BGC boards are around.
Comment: The boards can in principle be populated with different microcontrollers, but below the "typical" configuration is mentioned.
STorM32-BGC v1.2
- MCU: STM32F103RC
STorM32-BGC v1.1
- MCU: STM32F103RC
Comment: The order of pins on the I2C#2 port is reversed to that on the I2C#1 port; please consider this then connecting an MPU module to this port.
STorM32-BGC v0.17/v1.0
- MCU: STM32F103RB
Comment: The location of the pins needed to flash the firmware via an USB-TTL adapter is different here. Namely: