STorM32 Boards: Difference between revisions
Line 107: | Line 107: | ||
The terms of usage of the STorM32 project allows, and in fact encourages, making own hardware, for both DIY and commercial purposes, without restrictions. | The terms of usage of the STorM32 project allows, and in fact encourages, making own hardware, for both DIY and commercial purposes, without restrictions. | ||
=== | === Aliexpress Micro STorM32 BGC === | ||
---- | ---- | ||
[[File:HTB1REO1IpXXXXXjXpXXq6xXFXXX3-kl.jpg|thumb|caption| | [[File:HTB1REO1IpXXXXXjXpXXq6xXFXXX3-kl.jpg|thumb|caption|AliExpress Micro STorM32-BGC board]] | ||
{| | {| | ||
|- valign="top" | |- valign="top" |
Revision as of 12:51, 3 July 2015
The technical specifications of various STorM32 boards are presented. For suppliers/vendors please refer to Where to buy STorM32 boards. For a detailed description of the various connectors on the boards see Pins and Connectors.
"Original" STorM32 Boards
At present, the versions v1.1, v1.2, and v1.3 are in use (v0.17/v1.0 boards are deprecated). Their commonality is a resistive voltage regulator and the TC4452 motor drivers.
Comments:
- The boards can be populated with different motor drivers, namely TC4452 driver in DFN package or TC4452 driver in SOIC package; the DFN package allows somewhat higher motor currents. To date (25.June.2015) all commercially available boards have the DFN package.
- The boards can in principle be populated with different micro controllers; the standard configuration is a STM32F103RC.
STorM32-BGC v1.3
|
|
STorM32-BGC v1.2
Differences to the v1.3 board:
- voltage regulator: smaller SOT223 package
- only 2 auxiliary ports
STorM32-BGC v1.1
Differences to the v1.3 board:
- no Futaba S-bus support
- Spektrum satellite is supported, but no extra Spektrum connector on board
- no extra USB voltage protection diode
- voltage regulator: smaller SOT223 package
- only 2 auxiliary ports
WARNING: The pins of connector I2C#2 are in reverse order to those of connector I2C, which implies also reversed voltage polarity. Pay attention to that before connecting a second IMU to the I2C#2 port.
Descendants
The STorM32 boards listed here are based on/derived from the layout of the "original" board designed by Martinez and OlliW, but modified in some ways.
GLB STorM32 v1.31
|
|
Witespy STorM32-BGC v1.1 Mosfet Version
|
|
Third-Party Boards
The terms of usage of the STorM32 project allows, and in fact encourages, making own hardware, for both DIY and commercial purposes, without restrictions.
Aliexpress Micro STorM32 BGC
|
|
GLB Mini STorM32 BGC
|
|
AliExpress Mini STorM32 BGC
|
|
Comment: The info given on some pages is definitely wrong in some aspects. What we know so far (see also here and followup posts:
- the DRV8313 motor drives do not allow 2S operation
- only the RC port is available
- SBus is not supported
- it can be doubted that a BT module can be installed on board