Overview of NT Modules: Difference between revisions
Jump to navigation
Jump to search
Line 19: | Line 19: | ||
== Walmis0's NT IMU Module == | == Walmis0's NT IMU Module == | ||
These NT IMU modules are a bit different than the others in that they are based on a LPC1111 micro controller and use a MPU6050. They thus need to be loaded with their "own" firmware using their "own" flashing tools. | These NT IMU modules are a bit different than the others in that they are based on a LPC1111 micro controller and use a MPU6050. They thus need to be loaded with their "own" firmware using their "own" flashing tools. The firmware and instructions for flashing are provided by the vendor. | ||
Specifications: | Specifications: |
Revision as of 11:56, 29 April 2016
This page gives a brief overview of the various NT modules, or hardware which may be used as NT modules.
OlliW's v1.x NT Modules
CC3D Atom NT IMU Module
The Openpilot CC3D Atom and clones such as the Mini CC3D can be used as NT IMU modules.
GekoCH & OlliW's Marcia Motor Module
Walmis0's NT IMU Module
These NT IMU modules are a bit different than the others in that they are based on a LPC1111 micro controller and use a MPU6050. They thus need to be loaded with their "own" firmware using their "own" flashing tools. The firmware and instructions for flashing are provided by the vendor.
Specifications:
- size: 17 x 24 x 2.1 mm
- IMU used: MPU6050
- controller: LPC1111
- pin headers: 0.1 inch (2.54 mm)