Example Setups: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 30: | Line 30: | ||
* camera: Sony Nex 5n | * camera: Sony Nex 5n | ||
* pitch motor: [//www.rctimer.com/product_870.html rctimer model 5010-021-150T], R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t | * pitch motor: [//www.rctimer.com/product_870.html rctimer model 5010-021-150T], R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t | ||
* roll motor: [//www.rctimer.com/product_870.html rctimer model | * roll motor: [//www.rctimer.com/product_870.html rctimer model BGM5208-180T], R: 17.2 Ohm, config: 12N14P, winding: 0.24mm, 180t | ||
* yaw motor: [//www.rctimer.com/product_870.html rctimer model BGM5208-180T], R: 17.2 Ohm, config: 12N14P, winding: 0.24mm, 180t | * yaw motor: [//www.rctimer.com/product_870.html rctimer model BGM5208-180T], R: 17.2 Ohm, config: 12N14P, winding: 0.24mm, 180t | ||
* battery: 3S | * battery: 3S | ||
* typical pitch PID values: P=, I=, D=, Vmax= | * typical pitch PID values: P=11, I=450, D=0.5000, Vmax=110 | ||
* typical roll PID values: P=, I=, D=, Vmax= | * typical roll PID values: P=12, I=250, D=0.5000, Vmax=160 | ||
* typical yaw PID values: P=, I=, D=, Vmax= | * typical yaw PID values: P=12, I=150, D=0.6000, Vmax=155 | ||
* controller board: STorM32bgc v1.1, F103RC, TC's in SO08 package | * controller board: STorM32bgc v1.1, F103RC, TC's in SO08 package | ||
Revision as of 07:17, 26 February 2014
On this page you may describe and show your STorM32-based gimbal setup, including all relevant technical specifications (please try to adhere to the suggested list of technical infos).
Keychain Gimbals
OlliW's Micro Gimbal
Technical details:
- camera: key cam 808 #16 V2 with lense D
- pitch motor: PS2 Slim disc drive replacement motor, rewound, R: ca. 24 Ohm, config: 9N12P, winding: 0.10mm, 150t
- roll motor: PS2 Slim disc drive replacement motor, rewound, R: ca. 24 Ohm, config: 9N12P, winding: 0.10mm, 150t
- yaw motor: PS2 Slim disc drive replacement motor, rewound, R: ca. 24 Ohm, config: 9N12P, winding: 0.10mm, 150t
- battery: 3S
- typical pitch PID values: P=6.0, I=750, D=0.070, Vmax= 150
- typical roll PID values: P=7.0, I=450, D=0.185, Vmax= 150
- typical yaw PID values: P=7.0, I=450, D=0.185, Vmax= 150
- controller board: this is a test gimbal, boards are varying
Mobius ActionCam Gimbals
GoPro Hero Gimbals
Sony Nex Gimbals
Erick's
Technical details:
- camera: Sony Nex 5n
- pitch motor: rctimer model 5010-021-150T, R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
- roll motor: rctimer model BGM5208-180T, R: 17.2 Ohm, config: 12N14P, winding: 0.24mm, 180t
- yaw motor: rctimer model BGM5208-180T, R: 17.2 Ohm, config: 12N14P, winding: 0.24mm, 180t
- battery: 3S
- typical pitch PID values: P=11, I=450, D=0.5000, Vmax=110
- typical roll PID values: P=12, I=250, D=0.5000, Vmax=160
- typical yaw PID values: P=12, I=150, D=0.6000, Vmax=155
- controller board: STorM32bgc v1.1, F103RC, TC's in SO08 package