Bluetooth Module HC06: Difference between revisions
No edit summary |
|||
| Line 10: | Line 10: | ||
== Yellow Status Led == | == Yellow Status Led == | ||
There is a third, yellow led on the STorM32BGC board, which is directly connected to the HC06 bluetooth module. | There is a third, yellow led on the STorM32BGC board, which, if enabled, is directly connected to the HC06 bluetooth module and shows its status. The meaning of the blinks is described in the documentation for the HC06 module. | ||
== Where to get the HC06 module from == | == Where to get the HC06 module from == | ||
Revision as of 08:45, 5 April 2014
The STorM32-BGC can be equipped with a Bluetooth module for wireless communication. Specifically, it is the HC06 slave module.
Installation and Configuration
In order to use the StorM32 BGC via Bluetooth just solder the HC06 BT-Module in place, connect via USB and start the "BTConfigureTool - Configure Bluetooth Module" option from the Tools menu in OlliW's o323BGCTool.
Once the module has been configured, please restart the board by pressing reset or remove and resume power. Then try to connect via Bluetooth - for those who wonder what the correct PIN is: It is "1234"
Yellow Status Led
There is a third, yellow led on the STorM32BGC board, which, if enabled, is directly connected to the HC06 bluetooth module and shows its status. The meaning of the blinks is described in the documentation for the HC06 module.
Where to get the HC06 module from
Search for "HC06" and check that it is a slave (it sometimes is available also as master). In case of doubt carefully compare the product picture with the item in the above picture.
For possible sources, see the wiki entry Where to buy assescories and supplies: HC06 Bluetooth module