Model-based Control: Difference between revisions

From STorM32-BGC Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 3: Line 3:
For the underlying theory see [http://www.olliw.eu/2018/camera-gimbals-a-robotics-approach/ Camera Gimbals: A Robotics Approach].
For the underlying theory see [http://www.olliw.eu/2018/camera-gimbals-a-robotics-approach/ Camera Gimbals: A Robotics Approach].


<div class="toclimit-2">__TOC__</div>
<div class="toclimit-3">__TOC__</div>


= Parameters =
= Parameters =

Revision as of 09:56, 1 October 2019

The STorM32's model-based gimbal control can take into account, to a certain extend, the moments of inertia of the camera, and those of the roll and yaw arms. It also allows us to model the different KV values of the pitch, roll and yaw motors.

For the underlying theory see Camera Gimbals: A Robotics Approach.

Parameters

The camera is described by the three principal moments of inertia

  • Ipitch, Iroll, Iyaw

The roll arm is modeled with these moments of inertia

  • I(2)roll, I(2)yaw

and the yaw arm with

  • I(3)yaw

In the GUI they are accessible as the T parameters. The model-based PID controller can also take into account different KV values of the pitch, roll and yaw motors via the K parameters.

Gimbal-model-camera-inertias.jpg

Ideal Camera Design

From the perspective of PID control and gimbal axis coupling, the camera should ideally have these properties:

  • IrollIyaw
  • IpitchIroll, Iyaw or Ipitch << Iroll, Iyaw

The first condition is however more important than the second, and should be approached if possible.

A similar condition I(2)yawI(2)pitch would ideally be also fulfilled for the roll arm, which is however unrealistic in practical builds.

Moments of Inertia

Estimates for the relative ratios of the moments of inertia of the camera can be obtained by approximating it by a cuboid.

For a homogeneous solid cuboid it holds

I = 1/12 M ( a2 + b2 )

Links:

Camera Panasonic

width height length
2.5 cm 5.5 cm 9 cm
axis approximate moment of inertia relative ratio
pitch I ∝ 2.52 + 5.52 = 36.5 1
roll I ∝ 5.52 + 92 = 111.25 3.05
yaw I ∝ 2.52 + 92 = 87.25 2.39

Camera GoPro Hero5

width height length
2.5 cm 4.5 cm 6.3 cm
axis approximate moment of inertia relative ratio
pitch I ∝ 2.52 + 4.52 = 26.5 1
roll I ∝ 4.52 + 6.32 = 59.94 2.26
yaw I ∝ 2.52 + 6.32 = 45.94 1.73

Camera Mobius

width height length
6 cm 2 cm 3 cm
axis approximate moment of inertia relative ratio
pitch I ∝ 62 + 22 = 40 1
roll I ∝ 22 + 32 = 13 0.325
yaw I ∝ 62 + 32 = 45 1.125

As evidenced by these estimates, the shape of the Mobius camera is not ideal from a gimbal control perspective, and this camera is thus more difficult to stabilize than others.