Example Setups: Difference between revisions

From STorM32-BGC Wiki
Jump to navigation Jump to search
 
(57 intermediate revisions by 5 users not shown)
Line 1: Line 1:
On this page you may describe and show your STorM32-based gimbal setup, '''including''' all relevant technical specifications (please try to adhere to the suggested list of technical infos).
<div class="toclimit-3">__TOC__</div>
 
<br>
= Example Setups =
In this section you can find example setups (mainly PID values) for some standard gimbals.
 
== DYS Smart 3 Axis Gopro Gimbal ==
Gimbal: http://www.dys.hk/ProductShow.asp?ID=62
 
=== Settings ===
* GekoCH's: http://www.rcgroups.com/forums/showpost.php?p=30092104&postcount=2516
* wdaehn's: http://www.rcgroups.com/forums/showpost.php?p=30212877&postcount=2673
 
== Walkera G-3D 3 Axis Gimbal ==
Gimbal: http://www.walkera.com./en/showgoods.php?id=2215
 
=== Settings ===
* Tallyrver's: http://www.rcgroups.com/forums/showpost.php?p=32177445&postcount=595
 
== Goodluckbuy 3 Axis Gimbal (v2) ==
Gimbal: http://www.goodluckbuy.com/3-axis-brushless-gimbal-camera-mount-with-32bit-storm32-controller-for-gopro-3-4-fpv-black.html
 
=== Settings ===
* Treeburner's: http://www.rcgroups.com/forums/showpost.php?p=32698855&postcount=2078, http://www.rcgroups.com/forums/showpost.php?p=32689980&postcount=2067
 
== RcMaster FPV 3-Axis Brushless Gimbal for Sony NEX5/6/7 ==
Gimbal: http://www.rcmaster.net/de-fpv-3-axis-brushless-gimbal-w-motor-f%C3%BCr-sony-nex5-6-7-p238234.htm
 
=== Settings ===
*  amadeus': http://fpv-community.de/showthread.php?60783-Wer-Kennt-dieses-Gimbal&p=854545&viewfull=1#post854545
 
<br>
 
= User Setups =
In this section you may describe and show your STorM32-based gimbal setup, '''including''' all relevant technical specifications (please try to adhere to the suggested list of technical infos).
 
Please feel free to add your system here, the other users will appreciate it!


== Keychain Camera Gimbals ==
== Keychain Camera Gimbals ==
Line 12: Line 48:
* yaw motor: [//www.lioncast.de/Produktbilder_NEU/Playstation_1_2/PS2_Slim_Motor_7700x/PS2_Slim_Motor_7700x.jpg PS2 Slim disc drive replacement motor], rewound, R: ca. 24 Ohm, config: 9N12P, winding: 0.10mm, 150t
* yaw motor: [//www.lioncast.de/Produktbilder_NEU/Playstation_1_2/PS2_Slim_Motor_7700x/PS2_Slim_Motor_7700x.jpg PS2 Slim disc drive replacement motor], rewound, R: ca. 24 Ohm, config: 9N12P, winding: 0.10mm, 150t
* battery: 3S
* battery: 3S
* typical pitch PID values: P=6.0, I=750, D=0.070, Vmax= 150
* typical pitch PID values: P = 6.0, I = 750, D = 0.070, Vmax = 150 &nbsp;&nbsp; (f0=15.9Hz, d=0.40)
* typical roll PID values: P=7.0, I=450, D=0.185, Vmax= 150  
* typical roll PID values: P = 7.0, I = 450, D = 0.185, Vmax = 150 &nbsp;&nbsp; (f0=7.85Hz, d=0.38)
* typical yaw PID values: P=7.0, I=450, D=0.185, Vmax= 150
* typical yaw PID values: P = 7.0, I = 450, D = 0.185, Vmax = 150 &nbsp;&nbsp; (f0=7.85Hz, d=0.38)
* controller board: this is a test gimbal, boards are varying
* controller board: this is a test gimbal, boards are varying


== Mobius ActionCam Gimbals ==
== Mobius ActionCam Gimbals ==


=== EagleEi 3-Axis Gimbal ===
[[File:EagleEi Gimbal 3axis.jpg|thumb|200px]]
'''Technical details:'''
* camera: Mobius
* pitch motor: Walkera G-2D Part G-2D-Z-09 Brushless Motor WK-WS-22-001
* roll motor: Walkear G-2D Part G-2D-Z-09 Brushless Motor WK-WS-22-001
* yaw motor: Walkera G-2D Part G-2D-Z-09 Brushless Motor WK-WS-22-001
* pitch PID values: P = 3.00, I = 280, D = 0.045, Vmax = 93  &nbsp;&nbsp; (f0=12.6Hz, d=0.42, t=5.6ms)
* roll PID values: P = 3.40, I = 225, D = 0.050, Vmax = 108  &nbsp;&nbsp; (f0=10.7Hz, d=0.51, t=7.0ms)
* yaw PID values: P = 4.60, I = 85, D = 0.055, Vmax = 126  &nbsp;&nbsp; (f0=6.3Hz, d=1.06, t=18.3ms)
'''Project details:'''
* home page: http://open-diy-projects.com
* video: https://www.youtube.com/watch?v=sJdPNIIDpNc


== GoPro Hero Gimbals ==
== GoPro Hero Gimbals ==
Line 29: Line 80:
* pitch motor: [http://www.goodluckbuy.com/dji-phantom-brushless-gimbal-camera-mount-w-motor-and-controller-for-gopro3-fpv-aerial-photography.html motor taken from this GLB gimbal]
* pitch motor: [http://www.goodluckbuy.com/dji-phantom-brushless-gimbal-camera-mount-w-motor-and-controller-for-gopro3-fpv-aerial-photography.html motor taken from this GLB gimbal]
* roll motor: [http://www.goodluckbuy.com/dji-phantom-brushless-gimbal-camera-mount-w-motor-and-controller-for-gopro3-fpv-aerial-photography.html motors taken from this GLB gimbal]
* roll motor: [http://www.goodluckbuy.com/dji-phantom-brushless-gimbal-camera-mount-w-motor-and-controller-for-gopro3-fpv-aerial-photography.html motors taken from this GLB gimbal]
* yaw motor: [//www.rctimer.com/product_870.html rctimer model 5010-021-150T], R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
* yaw motor: [//www.rctimer.com/product-870.html rctimer model 5010-021-150T], R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
* battery: 3S
* battery: 3S
* pitch PID values: P=13, I=680, D=0.1400, Vmax=100
* pitch PID values: P = 13, I = 680, D = 0.1400, Vmax = 100 &nbsp;&nbsp; (f0=11.1Hz, d=0.67)
* roll PID values: P=7, I=450, D=0.1000, Vmax=115
* roll PID values: P = 7, I = 450, D = 0.1000, Vmax = 115 &nbsp;&nbsp; (f0=10.7Hz, d=0.52)
* yaw PID values: P=12.70, I=450, D=0.0900, Vmax=115
* yaw PID values: P = 12.70, I = 450, D = 0.0900, Vmax = 115 &nbsp;&nbsp; (f0=11.3Hz, d=1.00)
* controller board: STorM32bgc v1.0, F103RB, TC's in SO08 package
* controller board: STorM32bgc v1.0, F103RB, TC's in SO08 package
=== careyer's SToRM-stick===
[[File:StorM-stick.JPG|thumb|200px]]
'''Technical details:'''
* camera: Gopro Hero 3 BE
* pitch motor: [//www.rctimer.com/product-871.html rctimer model BG HP2212 ], R: 18.3 Ohm, config: 12N14P, winding: 0.15mm, 70t
* roll motor: [//www.rctimer.com/product-871.html rctimer model BG HP2212 ], R: 18.3 Ohm, config: 12N14P, winding: 0.15mm, 70t
* yaw motor: [//www.rctimer.com/product-871.html rctimer model BG HP2212 ], R: 18.3 Ohm, config: 12N14P, winding: 0.15mm, 70t
* battery: 3S
<!--* typical pitch PID values: P = 5, I = 100, D = 0.0500, Vmax = 100  &nbsp;&nbsp; (f0=7.118Hz, d=1.180)
* typical roll PID values: P = 5, I = 100, D = 0.0500, Vmax = 100  &nbsp;&nbsp; (f0=7.118Hz, d=1.180)
* typical yaw PID values: P = 11, I = 100, D = 0.1250, Vmax = 125  &nbsp;&nbsp; (f0=4.502Hz, d=1.5556)-->
* typical pitch PID values: P = 4.0, I = 200, D = 0.100, Vmax = 100  &nbsp;&nbsp; (f0=7.12Hz, d=0.45)
* typical roll PID values: P = 4.0, I = 200, D = 0.100, Vmax = 100  &nbsp;&nbsp; (f0=7.12Hz, d=0.45)
* typical yaw PID values: P = 11.0, I = 280, D = 0.200, Vmax = 100  &nbsp;&nbsp; (f0=5.96Hz, d=0.74)
* controller board: STorM32bgc v1.2 FW 027d


== Sony Nex Gimbals ==
== Sony Nex Gimbals ==
Line 42: Line 110:
'''Technical details:'''
'''Technical details:'''
* camera: Sony Nex 5n
* camera: Sony Nex 5n
* pitch motor: [//www.rctimer.com/product_870.html rctimer model 5010-021-150T], R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
* pitch motor: [//www.rctimer.com/product-870.html rctimer model 5010-021-150T], R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
* roll motor: [//www.rctimer.com/product_870.html rctimer model BGM5208-180T], R: 17.2 Ohm, config: 12N14P, winding: 0.24mm, 180t  
* roll motor: [//www.rctimer.com/product-870.html rctimer model BGM5208-180T], R: 17.2 Ohm, config: 12N14P, winding: 0.24mm, 180t  
* yaw motor: [//www.rctimer.com/product_870.html rctimer model BGM5208-180T], R: 17.2 Ohm, config: 12N14P, winding: 0.24mm, 180t   
* yaw motor: [//www.rctimer.com/product-870.html rctimer model BGM5208-180T], R: 17.2 Ohm, config: 12N14P, winding: 0.24mm, 180t   
* battery: 3S
* battery: 3S
* typical pitch PID values: P=11, I=450, D=0.5000, Vmax=110
* typical pitch PID values: P = 11, I = 450, D = 0.5000, Vmax = 110 &nbsp;&nbsp; (f0=4.78Hz, d=0.37)
* typical roll PID values: P=12, I=250, D=0.5000, Vmax=160
* typical roll PID values: P = 12, I = 250, D = 0.5000, Vmax = 160 &nbsp;&nbsp; (f0=3.56Hz, d=0.54)
* typical yaw PID values: P=12, I=150, D=0.6000, Vmax=155
* typical yaw PID values: P = 12, I = 150, D = 0.6000, Vmax = 155 &nbsp;&nbsp; (f0=2.52Hz, d=0.63)
* controller board: STorM32bgc v1.1, F103RC, TC's in SO08 package
* controller board: STorM32bgc v1.1, F103RC, TC's in SO08 package


Line 56: Line 124:
'''Technical details:'''
'''Technical details:'''
* camera: Sony Nex 5n
* camera: Sony Nex 5n
* pitch motor: [//www.rctimer.com/product_870.html rctimer model 5010-021-150T], R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
* pitch motor: [//www.rctimer.com/product-870.html rctimer model 5010-021-150T], R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
* roll motor: [//www.rctimer.com/product_870.html rctimer model 5010-021-150T], R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
* roll motor: [//www.rctimer.com/product-870.html rctimer model 5010-021-150T], R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
* yaw motor: [//www.rctimer.com/product_870.html rctimer model 5010-021-150T], R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
* yaw motor: [//www.rctimer.com/product-870.html rctimer model 5010-021-150T], R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
* battery: 2S and 3S
* battery: 2S and 3S
* 2S pitch PID values: P=13.0, I=680, D=0.1250, Vmax=175
* 2S pitch PID values: P = 13.0, I = 680, D = 0.1250, Vmax = 175 &nbsp;&nbsp; (f0=11.7Hz, d=0.71)
* 2S roll PID values: P=16.5, I=340, D=0.1800, Vmax=190
* 2S roll PID values: P = 16.5, I = 340, D = 0.1800, Vmax = 190 &nbsp;&nbsp; (f0=6.92Hz, d=1.05)
* 2S yaw PID values: P=17.3, I=280, D=0.3000, Vmax=215
* 2S yaw PID values: P = 17.3, I = 280, D = 0.3000, Vmax = 215 &nbsp;&nbsp; (f0=4.86Hz, d=0.94)
* 3S pitch PID values: P=13.0, I=680, D=0.1250, Vmax=115
 
* 3S roll PID values: P=16.5, I=340, D=0.1800, Vmax=130
Old 3S PID settings:
* 3S yaw PID values: P=17.3, I=280, D=0.3000, Vmax=135
* 3S pitch PID values: P = 13.0, I = 680, D = 0.1250, Vmax=115 &nbsp;&nbsp; (f0=11.7Hz, d=0.71)
* controller board: STorM32bgc v1.0, F103RB, TC's in SO08 package
* 3S roll PID values: P = 16.5, I = 340, D = 0.1800, Vmax = 130 &nbsp;&nbsp; (f0=6.92Hz, d=1.05)
* 3S yaw PID values: P = 17.3, I = 280, D = 0.3000, Vmax = 135 &nbsp;&nbsp; (f0=4.86Hz, d=0.94)
 
New 3S PID settings:
* 3S pitch PID values: P = 11.0, I = 340, D = 0.1150, Vmax=110  &nbsp;&nbsp; (f0=8.65Hz, d=0.88)
* 3S roll PID values: P = 12,3 I = 300, D = 0.2550, Vmax = 111  &nbsp;&nbsp; (f0=5.46Hz, d=0.70)
* 3S yaw PID values: P = 12.0, I = 365, D = 0.4000, Vmax = 111  &nbsp;&nbsp; (f0=4.81Hz, d=0.50)
 
* controller board: STorM32bgc v1.0, F103RB, TC's in SO08 package and v1.2, F103RC, TC's in DFN package
 
=== wdaehn's RC Timer ASP ===
[[File:RCTimer ASP NEX Blue.jpg|thumb|200px]]
 
'''Technical details:'''
* camera: Sony Nex 5n with SEL-P1650 Lens
* gimbal: [//www.rctimer.com/product-977.html rctimer ASP 3 axis Nex-GH5 brushless gimbal]
* pitch motor: [//www.rctimer.com/product-901.html rctimer model BGM4108-015-130T], R: 17.00 Ohm, config: 24N22P, winding: 0.15mm, 130t
* roll motor: [//www.rctimer.com/product-901.html rctimer model BGM4108-015-130T], R: 17.00 Ohm, config: 24N22P, winding: 0.15mm, 130t
* yaw motor: [//www.rctimer.com/product-1124.html rctimer model BGM4114HS-017-100T], R: 15.2 Ohm, config: 24N22P, winding: 0.17mm, 100t 
* battery: 3S
* typical pitch PID values: P = 9.30, I = 590.00, D = 0.0400, Vmax = 187  &nbsp;&nbsp; (f0=19.33Hz, d=0.9572)
* typical roll PID values: P = 8.50, I = 240.00, D = 0.0700, Vmax = 230  &nbsp;&nbsp; (f0=9.319Hz, d=1.0369)
* typical yaw PID values: P = 9.70, I = 170, D = 0.0700, Vmax = 140  &nbsp;&nbsp; (f0=8.843Hz, d=1.4059) <br>--- Please note, Yaw was not tuned much since it is not relevant for my cablecam ---
* controller board: STorM32bgc v1.2, F103RC, TC's in SO08 package, Firmware v0.28

Latest revision as of 11:44, 17 September 2015


Example Setups

In this section you can find example setups (mainly PID values) for some standard gimbals.

DYS Smart 3 Axis Gopro Gimbal

Gimbal: http://www.dys.hk/ProductShow.asp?ID=62

Settings

Walkera G-3D 3 Axis Gimbal

Gimbal: http://www.walkera.com./en/showgoods.php?id=2215

Settings

Goodluckbuy 3 Axis Gimbal (v2)

Gimbal: http://www.goodluckbuy.com/3-axis-brushless-gimbal-camera-mount-with-32bit-storm32-controller-for-gopro-3-4-fpv-black.html

Settings

RcMaster FPV 3-Axis Brushless Gimbal for Sony NEX5/6/7

Gimbal: http://www.rcmaster.net/de-fpv-3-axis-brushless-gimbal-w-motor-f%C3%BCr-sony-nex5-6-7-p238234.htm

Settings


User Setups

In this section you may describe and show your STorM32-based gimbal setup, including all relevant technical specifications (please try to adhere to the suggested list of technical infos).

Please feel free to add your system here, the other users will appreciate it!

Keychain Camera Gimbals

OlliW's

Storm32-bgc-v017-test-microgimbal-01-wp01.jpg

Technical details:

  • camera: key cam 808 #16 V2 with lense D
  • pitch motor: PS2 Slim disc drive replacement motor, rewound, R: ca. 24 Ohm, config: 9N12P, winding: 0.10mm, 150t
  • roll motor: PS2 Slim disc drive replacement motor, rewound, R: ca. 24 Ohm, config: 9N12P, winding: 0.10mm, 150t
  • yaw motor: PS2 Slim disc drive replacement motor, rewound, R: ca. 24 Ohm, config: 9N12P, winding: 0.10mm, 150t
  • battery: 3S
  • typical pitch PID values: P = 6.0, I = 750, D = 0.070, Vmax = 150    (f0=15.9Hz, d=0.40)
  • typical roll PID values: P = 7.0, I = 450, D = 0.185, Vmax = 150    (f0=7.85Hz, d=0.38)
  • typical yaw PID values: P = 7.0, I = 450, D = 0.185, Vmax = 150    (f0=7.85Hz, d=0.38)
  • controller board: this is a test gimbal, boards are varying

Mobius ActionCam Gimbals

EagleEi 3-Axis Gimbal

EagleEi Gimbal 3axis.jpg

Technical details:

  • camera: Mobius
  • pitch motor: Walkera G-2D Part G-2D-Z-09 Brushless Motor WK-WS-22-001
  • roll motor: Walkear G-2D Part G-2D-Z-09 Brushless Motor WK-WS-22-001
  • yaw motor: Walkera G-2D Part G-2D-Z-09 Brushless Motor WK-WS-22-001
  • pitch PID values: P = 3.00, I = 280, D = 0.045, Vmax = 93    (f0=12.6Hz, d=0.42, t=5.6ms)
  • roll PID values: P = 3.40, I = 225, D = 0.050, Vmax = 108    (f0=10.7Hz, d=0.51, t=7.0ms)
  • yaw PID values: P = 4.60, I = 85, D = 0.055, Vmax = 126    (f0=6.3Hz, d=1.06, t=18.3ms)

Project details:

GoPro Hero Gimbals

Hexakopter's

Hexakopter's GoPro-Gimbal.jpg

Technical details:

  • camera: GoPro Hero 1
  • pitch motor: motor taken from this GLB gimbal
  • roll motor: motors taken from this GLB gimbal
  • yaw motor: rctimer model 5010-021-150T, R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
  • battery: 3S
  • pitch PID values: P = 13, I = 680, D = 0.1400, Vmax = 100    (f0=11.1Hz, d=0.67)
  • roll PID values: P = 7, I = 450, D = 0.1000, Vmax = 115    (f0=10.7Hz, d=0.52)
  • yaw PID values: P = 12.70, I = 450, D = 0.0900, Vmax = 115    (f0=11.3Hz, d=1.00)
  • controller board: STorM32bgc v1.0, F103RB, TC's in SO08 package

careyer's SToRM-stick

StorM-stick.JPG

Technical details:

  • camera: Gopro Hero 3 BE
  • pitch motor: rctimer model BG HP2212 , R: 18.3 Ohm, config: 12N14P, winding: 0.15mm, 70t
  • roll motor: rctimer model BG HP2212 , R: 18.3 Ohm, config: 12N14P, winding: 0.15mm, 70t
  • yaw motor: rctimer model BG HP2212 , R: 18.3 Ohm, config: 12N14P, winding: 0.15mm, 70t
  • battery: 3S
  • typical pitch PID values: P = 4.0, I = 200, D = 0.100, Vmax = 100    (f0=7.12Hz, d=0.45)
  • typical roll PID values: P = 4.0, I = 200, D = 0.100, Vmax = 100    (f0=7.12Hz, d=0.45)
  • typical yaw PID values: P = 11.0, I = 280, D = 0.200, Vmax = 100    (f0=5.96Hz, d=0.74)
  • controller board: STorM32bgc v1.2 FW 027d

Sony Nex Gimbals

Erick's

Technical details:

  • camera: Sony Nex 5n
  • pitch motor: rctimer model 5010-021-150T, R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
  • roll motor: rctimer model BGM5208-180T, R: 17.2 Ohm, config: 12N14P, winding: 0.24mm, 180t
  • yaw motor: rctimer model BGM5208-180T, R: 17.2 Ohm, config: 12N14P, winding: 0.24mm, 180t
  • battery: 3S
  • typical pitch PID values: P = 11, I = 450, D = 0.5000, Vmax = 110    (f0=4.78Hz, d=0.37)
  • typical roll PID values: P = 12, I = 250, D = 0.5000, Vmax = 160    (f0=3.56Hz, d=0.54)
  • typical yaw PID values: P = 12, I = 150, D = 0.6000, Vmax = 155    (f0=2.52Hz, d=0.63)
  • controller board: STorM32bgc v1.1, F103RC, TC's in SO08 package

Hexakopter's

Hexakopter's Sony Nex5n-Gimbal.jpg

Technical details:

  • camera: Sony Nex 5n
  • pitch motor: rctimer model 5010-021-150T, R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
  • roll motor: rctimer model 5010-021-150T, R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
  • yaw motor: rctimer model 5010-021-150T, R: 14.65 Ohm, config: 12N14P, winding: 0.21mm, 150t
  • battery: 2S and 3S
  • 2S pitch PID values: P = 13.0, I = 680, D = 0.1250, Vmax = 175    (f0=11.7Hz, d=0.71)
  • 2S roll PID values: P = 16.5, I = 340, D = 0.1800, Vmax = 190    (f0=6.92Hz, d=1.05)
  • 2S yaw PID values: P = 17.3, I = 280, D = 0.3000, Vmax = 215    (f0=4.86Hz, d=0.94)

Old 3S PID settings:

  • 3S pitch PID values: P = 13.0, I = 680, D = 0.1250, Vmax=115    (f0=11.7Hz, d=0.71)
  • 3S roll PID values: P = 16.5, I = 340, D = 0.1800, Vmax = 130    (f0=6.92Hz, d=1.05)
  • 3S yaw PID values: P = 17.3, I = 280, D = 0.3000, Vmax = 135    (f0=4.86Hz, d=0.94)

New 3S PID settings:

  • 3S pitch PID values: P = 11.0, I = 340, D = 0.1150, Vmax=110    (f0=8.65Hz, d=0.88)
  • 3S roll PID values: P = 12,3 I = 300, D = 0.2550, Vmax = 111    (f0=5.46Hz, d=0.70)
  • 3S yaw PID values: P = 12.0, I = 365, D = 0.4000, Vmax = 111    (f0=4.81Hz, d=0.50)
  • controller board: STorM32bgc v1.0, F103RB, TC's in SO08 package and v1.2, F103RC, TC's in DFN package

wdaehn's RC Timer ASP

RCTimer ASP NEX Blue.jpg

Technical details:

  • camera: Sony Nex 5n with SEL-P1650 Lens
  • gimbal: rctimer ASP 3 axis Nex-GH5 brushless gimbal
  • pitch motor: rctimer model BGM4108-015-130T, R: 17.00 Ohm, config: 24N22P, winding: 0.15mm, 130t
  • roll motor: rctimer model BGM4108-015-130T, R: 17.00 Ohm, config: 24N22P, winding: 0.15mm, 130t
  • yaw motor: rctimer model BGM4114HS-017-100T, R: 15.2 Ohm, config: 24N22P, winding: 0.17mm, 100t
  • battery: 3S
  • typical pitch PID values: P = 9.30, I = 590.00, D = 0.0400, Vmax = 187    (f0=19.33Hz, d=0.9572)
  • typical roll PID values: P = 8.50, I = 240.00, D = 0.0700, Vmax = 230    (f0=9.319Hz, d=1.0369)
  • typical yaw PID values: P = 9.70, I = 170, D = 0.0700, Vmax = 140    (f0=8.843Hz, d=1.4059)
    --- Please note, Yaw was not tuned much since it is not relevant for my cablecam ---
  • controller board: STorM32bgc v1.2, F103RC, TC's in SO08 package, Firmware v0.28
Retrieved from "http:///storm32bgc-wiki/index.php?title=Example_Setups&oldid=2719"